Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C0072 — Konica-Minolta Di450

Code: C0072

Description: Main Hopper Toner Replenishing Motor’s failure to turn
• The Toner Bottle Home Position Sensor does not go HIGH within 5 sec. after the motor has started turning. • The Toner Bottle Home Position Sensor does not go LOW within 10 sec. after the motor has started turning and the sensor has gone HIGH. • The motor is stationary or the Toner Bottle Home Position Sensor is HIGH 2 sec. after the motor has stopped turning.
Remedy: 1 Toner Bottle turns when the Toner Bottle is turned a half turn and the Front Door is closed. NO Correct drive coupling. 2 I/O check for Toner Bottle Home Position Sensor operation: the voltage across PJ11A-5 on Master Board and GND is DC5V (Toner Bottle at home position) and DC0V (Toner Bottle at a position other than home) when step 1 is performed. YES Change Master Board. NO Check sensor for installation. Correct detecting plate. Change sensor. 3 Main Hopper Toner Replenishing Motor rotation: the voltage across PJ11A-1 on Master Board and GND is DC0V (Toner Bottle at a stop) and DC24V (Toner Bottle turning) when step 1 is performed. YES Change motor. NO Change Master Board.

← Xem tất cả mã lỗi Konica-Minolta Di450

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie