Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C0910 — Konica-Minolta Di450

Code: C0910

Description: 2nd Drawer Paper Lift-Up Sensor malfunction
• The 2nd Drawer Paper Lift-Up Sensor is not blocked (LOW) even after the lapse of 5 sec. after the 2nd Drawer Paper Lift-Up Motor has started turning. • The 2nd Drawer Paper Lift-Up Sensor is not activated even when the 2nd Drawer Paper Lift-Up Motor Pulse Sensor detects 150 edges of rotation detection pulses after the 2nd Drawer Paper Lift-Up Motor has started turning.
Remedy: 1 Lift-Up Motor turns when the 2nd Drawer is slid out and then back in. NO Correct drive coupling. 2 2nd Drawer Lift-Up Motor rotation: the voltage across PJ3A-13B on Master Board and GND is DC0V (motor deenergized) and DC24V (motor energized) after the 2nd Drawer has been slid back in. YES Change motor. NO Change Master Board. 3 I/O check for 2nd Drawer Lift-Up Motor Pulse Sensor operation: the voltage across PJ3A- 11B on Master Board and GND changes in the range between DC0V and DC5V while 2nd Drawer Lift-Up Motor is turning. YES Change Master Board. NO Correct drive coupling. Change sensor. 4 I/O check for 2nd Drawer Paper Lift-Up Sensor: the voltage across PJ4A-12B on Master Board and GND is DC0V (sensor unblocked) and DC5V (sensor blocked). YES Change Master Board. NO Change sensor.

← Xem tất cả mã lỗi Konica-Minolta Di450

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie