Remedy: 1 Shift Gate Motor rotation: the voltage across PJ7A-2B on Control Board and GND is DC0V (motor deenergized) and DC24V (motor energized) when the drawer is slid in with paper loaded on the Shift Tray only. YES Correct drive coupling. Change motor or flat cable. NO Change Control Board. Change Cabinet Transport Board. 2 I/O check for Shift Gate Position Sensor operation: the voltage across PJ7A-1B on Control Board and GND is DC5V (sensor unblocked) and DC0V (sensor blocked) when the drawer is slid in with paper loaded on the Shift Tray only. YES Change Control Board. Change Cabinet Transport Board. NO Change sensor. Change flat cable.