Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C1334 — Konica-Minolta Di450

Code: C1334

Description: Duplex take-up print command error
• A Duplex take-up print command is not received for the paper to be taken up from the Duplex after the paper has moved past the horizontal transport, but before it reaches the Transport Roller. • The number of Duplex take-up print commands falls short of the number of sheets of paper to be taken up from the Duplex, or the leading edge of a sheet of paper, for which a Duplex take-up print command is yet to be received, activates the Transport Roller Sensor.
Remedy: 1. Reset the malfunction and turn OFF and ON the Power Switch. 2. If the same malfunction persists, run Mem. - Prn selected from I.R. Mem. Prn selected in the following sequence: Tech. Rep. Mode - Function - Image Memory. 3. If the malfunction is detected a third time, change Master Board or Image Processing Board.

← Xem tất cả mã lỗi Konica-Minolta Di450

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie