Code: C0520
Description: Abnormally high fusing temperature
• The surface temperature of the Upper Using Roller remains 215°C or more for a continuous period of 2 sec. or more after the copier has completed warming up. • The surface temperature of the Lower Using Roller remains 200°C or more for a continuous period of 2 sec. or more after the copier has completed warming up.
• The surface temperature of the Upper Using Roller remains 215°C or more for a continuous period of 2 sec. or more after the copier has completed warming up. • The surface temperature of the Lower Using Roller remains 200°C or more for a continuous period of 2 sec. or more after the copier has completed warming up.
Remedy: 1 Upper Fusing Roller Heater Lamp is ON even after the copier has completed warming up. Or Lower Fusing Roller Heater Lamp is ON when the surface temperature of Lower Fusing Roller Heater Lamp is 140°C or more as indicated on Level History under the Tech. Rep. mode. YES Change DC Power Supply Main. 2 Upper and Lower Fusing Roller Thermistors are installed properly. NO Reinstall. 3 Upper and Lower Fusing Roller Thermistors are dirty. NO Clean. 4 Upper Fusing Roller Thermistor operation: the resistance across CN217-2 and 3 on the Fusing Unit end is infinity with CN217 (4P) disconnected. YES Change Upper Fusing Roller Thermistor. 5 Lower Fusing Roller Thermistor operation: the resistance across CN218-2 and 3 on the Fusing Unit end is infinity with CN218 (4P) disconnected. YES Change Lower Fusing Roller Thermistor.