Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C0924 — Konica-Minolta Di552

Code: C0924

Description: 1st Drawer Lift-Up Motor’s failure to turn
The 1st Drawer Paper Lift-Up Motor Pulse Sensor detects no edges of rotation detection pulses even after the lapse of 500 ms after the 1st Drawer Paper Lift-Up Motor has started turning.
Remedy: 1 Lift-Up Motor turns when the 1st Drawer is slid out and then back in. NO Correct drive coupling. 2 1st Drawer Lift-Up Motor rotation: the voltage across PJ3A-13A on Master Board and GND is DC0V (motor deenergized) and DC24V (motor energized) after the 1st Drawer has been slid back in. YES Change motor. NO Change Master Board. 3 I/O check for 1st Drawer Lift-Up Motor Pulse Sensor operation: the voltage across PJ3A- 11A on Master Board and GND changes in the range between DC0V and DC5V while 1st Drawer Lift-Up Motor is turning. YES Change Master Board. NO Correct drive coupling. Change sensor. 4 I/O check for 1st Drawer Paper Lift-Up Sensor: the voltage across PJ4A-6B on Master Board and GND is DC0V (sensor unblocked) and DC5V (sensor blocked)

← Xem tất cả mã lỗi Konica-Minolta Di552

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie