Remedy: 1 Shift Motor turns when the 3rd Drawer is slid in with paper loaded on the Shift Tray (paper is moved to the Main Tray). NO Correct drive coupling. 2 Shift Motor rotation: the voltage across PJ7A- 4B on Control Board and GND is DC0V (motor deenergized) and DC24V (motor energized) in step 1. YES Change motor or Cabinet Transport Board. Change flat cable. NO Change Control Board. 3 I/O check for Shift Motor Pulse Sensor operation: the voltage across PJ7A-3A on Control Board and GND changes in the range between DC0V and DC5V while the Shift Motor is turning. YES Change Control Board. NO Correct drive coupling. Change sensor.