Code: C1334
Description: Duplex take-up print command error
• A Duplex take-up print command is not received for the paper to be taken up from the Duplex after the paper has moved past the horizontal transport, but before it reaches the Transport Roller. • The number of Duplex take-up print commands falls short of the number of sheets of paper to be taken up from the Duplex, or the leading edge of a sheet of paper, for which a Duplex take-up print command is yet to be received, activates the Transport Roller Sensor.
• A Duplex take-up print command is not received for the paper to be taken up from the Duplex after the paper has moved past the horizontal transport, but before it reaches the Transport Roller. • The number of Duplex take-up print commands falls short of the number of sheets of paper to be taken up from the Duplex, or the leading edge of a sheet of paper, for which a Duplex take-up print command is yet to be received, activates the Transport Roller Sensor.
Remedy: 1. Reset the malfunction and turn OFF and ON the Power Switch. 2. If the same malfunction persists, run Mem. - Prn selected from I.R. Mem. Prn selected in the following sequence: Tech. Rep. Mode - Function - Image Memory. 3. If the malfunction is detected a third time, change Master Board or Image Processing Board.