Code: 0500
Description: Fuser warm-up failure
• The thermistor does not detect a predetermined temperature value even after the lapse of a predetermined period of time after the current warm-up cycle has been started and the current warm-up cycle is thus not completed.
• The thermistor does not detect a predetermined temperature value even after the lapse of a predetermined period of time after the current warm-up cycle has been started and the current warm-up cycle is thus not completed.
Remedy: 1 Change fuser unit. 2 For magicolor 1600W: 2.1. Main switch is turned ON. 2.2. Open the top cover. 2.3. Press the following keys in this order. Rotate Toner key - Clear key - Clear key - Rotate Toner key. 2.4. Main switch is turned OFF/ON. For magicolor 1650EN: 2.1. Main switch is turned ON. 2. Execute [SERVICE MENU] - [FUSER UNLOCK]. 3 Change PRCB. 4 Change DCPU.