Code: 292.01
Description: This is caused by the flatbed scanner module being locked during POR.
Remedy: Step 1 Check to make sure the flatbed scanner lock is in the unlocked position. Is it unlocked? Go to step 2. Unlock the scanner. Step 2 Check the flatbed scanner home position sensor for proper operation. Enter Diagnostic Menu >Scanner Tests >Sensor Tests, and then observe the line Sensor (FB scanner HP). The sensor should report 1 when the flatbed scanner module is in the home position, and 0 in any other position. Does the display on the control panel correspond to the flatbed scanner module position? Problem solved. Go to step 3. Step 3 Check the sensor for proper connection. Is the sensor properly connected? Replace the flatbed scanner home position sensor. See “Flatbed home position sensor removal”. Replace the connection.