Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 904 — Lexmark C510

Code: 904

Description: Black developer clutch error (DCLK)
Remedy: 1 Turn printer off and remove right cover. Is developer clutch cable properly connected? Go to step 2. Properly connect cable. Go to step 5.
2 Is developer clutch cable damaged? Replace developer drive assembly. Go to step 3.
3 Disconnect clutch cable. On clutch side, measure resistance between two outer pins. Is resistance between 139 and 171 ohms? Go to step 4. Replace developer drive assembly.
4 Remove I/O board shield. Disconnect cable from DCN10 on I/O board. Check cable continuity from DCN10 pins 23 and 24 to connector that attaches to black developer clutch cable. Ensure that pins are not shorted. Is cable okay? Replace I/O board. Go to step 5. Replace cable. Go to step 5.
5 If waste toner bottle is removed, reinsert it. Ensure rear cover assembly cover is shut. Override top and front cover interlock switches. For location, Reconnect operator panel. Turn printer on. Does 901 error reappear? Go to step 6. Problem solved.
6 Turn printer off and remove engine controller board shield. Check cable that connects I2CN on engine controller board to DCN3 on I/O board for proper connection, damage, pin shorting and continuity. Is cable okay? Replace engine controller board. Replace cable.

← Xem tất cả mã lỗi Lexmark C510

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie