Code: 914
Description: Laser fan error
Remedy: 1 Turn printer off and remove I/O board shield. Is cable properly connected to I/O board connector DCN8? Go to step 2. Properly connect cable. 2 Ensure rear cover assembly cover is shut. Override top and front cover interlock switches. For location, Reconnect operator panel. Turn printer on and check for 24VDC between DCN8 pin 1 and power ground (you can touch negative lead of voltmeter to metal bracket that holds I/O board to obtain ground.) Is voltage present and correct? Replace laser unit fan assembly. Retest printer. If error clears, problem solved, otherwise go to step 3. Replace I/O board. Retest printer. If error clears, problem solved, else go to step 3. 3 Turn printer off and check cable that connects engine controller board connector I2CN to I/O board connector DCN3 for continuity and pin shorts. Is cable okay? Replace engine controller board. Replace cable.