Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 986 — Lexmark C510

Code: 986

Description: Duplex connection error 2
Indicates that there is a connection problem between the duplex unit and engine controller board.
Remedy: 1 Check duplex unit cable. is cable properly connected? Replace duplex unit. If problem persists, go to step 2. Properly connect cable. If problem persists, go to step 2. 2 Check cable connection to connector DPCN located on engine controller board. This will allow access to DPCN. Is cable properly connected? Go to step 3. Properly connect cable. If problem persists, go to step 3. 3 Disconnect cable and check for continuity between DPCN connector and duplex connector located on back of printer. Is there continuity? Replace engine controller board. Replace faulty cable.

← Xem tất cả mã lỗi Lexmark C510

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie