Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 991 — Lexmark C510

Code: 991

Description: Transfer roller clutch error
Indicates a problem with transfer roller cable connection.
Remedy: 1 Turn printer off and remove printer right cover. Disconnect transfer roller clutch from cable. Measure resistance between two outer pins on transfer roller clutch. Does resistance measure between 119 and 145 ohms? Go to step 2. Replace faulty transfer roller clutch.
2 Remove I/O board shield. Disconnect cable from DCN10 on I/O board. Check cable continuity from DCN10 pins 7 and 8 (cable) to connector that attaches to transfer roller clutch. Ensure that pins are not shorted. Is cable okay? Replace I/O board. If problem persists, go to step 3. Go to step 3.
3 Remove engine controller board shield. Check cable that connects I2CN on engine controller board to DCN3 on I/O board for proper connection, damage, pin shorting and continuity. Is cable okay? Replace engine controller board. Replace cable.

← Xem tất cả mã lỗi Lexmark C510

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie