Code: 993
Description: Fuser clutch error
Indicates a problem with fuser clutch cable connection.
Indicates a problem with fuser clutch cable connection.
Remedy: 1 Turn printer off and remove printer right cover. Disconnect fuser clutch from cable. Measure resistance between two outer pins on fuser clutch. Does resistance measure between 133 and 163 ohms? Go to step 2. Replace faulty fuser clutch. 2 Remove I/O board shield. Disconnect cable from DCN10 on I/O board. Check cable continuity from DCN10 pins 5 and 6 (cable) to connector that attaches to cleaning roller clutch. Ensure that pins are not shorted. Is cable okay? Replace I/O board. If problem persists, go to step 3. Replace cable. 3 Remove engine controller board shield. Check cable that connects I2CN on engine controller board to DCN3 on I/O board for proper connection, damage, pin shorting, and continuity. Is cable okay? Replace engine controller board. Replace cable.