Code: 920-08
Description: POST Error
Exit sensor not connected
Exit sensor not connected
Remedy: 1 Turn the printer off and remove the rear cover. Check connector JFUSER1 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If fuser cable is damaged, replace cable.
2 Remove fuser. Go to “Fuser removal”. Check DC auto-connects on both the fuser and the printer for damage. Are connectors free of damage? Go to step 3. If connector is damaged on fuser, replace fuser. If the cable connectors are damaged, replace the JFUSER1 cable.
3 Check for the following continuity between DC auto-connect and FUSER1. Is continuity present? DC auto-connect JFUSER1 pin 6 pin 6 pin 7 pin 7 pin 8 pin 8 Go to step 4. Replace DC fuser cable.
4 Reinstall fuser. Go to “Fuser removal”. Does error clear? Problem solved. Go to step 5.
5 Replace fuser. Go to “Fuser removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.
2 Remove fuser. Go to “Fuser removal”. Check DC auto-connects on both the fuser and the printer for damage. Are connectors free of damage? Go to step 3. If connector is damaged on fuser, replace fuser. If the cable connectors are damaged, replace the JFUSER1 cable.
3 Check for the following continuity between DC auto-connect and FUSER1. Is continuity present? DC auto-connect JFUSER1 pin 6 pin 6 pin 7 pin 7 pin 8 pin 8 Go to step 4. Replace DC fuser cable.
4 Reinstall fuser. Go to “Fuser removal”. Does error clear? Problem solved. Go to step 5.
5 Replace fuser. Go to “Fuser removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.