Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 946-00 — Lexmark C520

Code: 946-00

Description: Transfer Roll
Yellow transfer roll has failed.
Remedy: 1 Turn the printer off and remove the rear cover. Check connector JHVPS1 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If HVPS1 cable is damaged, replace top access cover assembly. Go to “Top access cover assembly removal”.
Disconnect JHVPS1 from system card and HVPS. Check for the following continuity. JHVPS1 cable HVPS end System card end pin 19 pin 19 pin 20 pin 20 Is continuity present? Go to step 3. Replace top access cover assembly. Go to “Top access cover assembly removal”.
3 Remove HVPS. Go to “High volt power supply (HVPS) removal”. Check for continuity between yellow1 and yellow2 on transfer contact assembly. Is continuity present? Go to step 4. Replace transfer contact assembly. Go to “Transfer contact assembly removal”.
4 Replace transfer contact assembly. Go to “Transfer contact assembly removal”. Does error clear? Problem solved. Go to step 5.
5 Replace HVPS. Go to “High volt power supply (HVPS) removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.

← Xem tất cả mã lỗi Lexmark C520

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie