Code: 120-03
Description: Fuser Error
An error has occurred in the fuser.
An error has occurred in the fuser.
Remedy: 1 Check the input voltage switch on the back of the low volt power supply (LVPS). Is the voltage level (115/230) properly set? Go to step 2. Set switch for proper country voltage.
2 Turn the printer off and remove the rear cover. Check connector JFUSER1 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go step 3. If connector is damaged on system card, replace system card. Go to “System card removal”. If fuser cable is damaged, replace cable.
3 Check connector JLVPS1 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go step 4. If connector is damaged on system card, replace system card. Go to “System card removal”. If LVPS cable is damaged, replace LVPS. Go to “Low volt power supply (LVPS) removal”.
4 Replace fuser. Go to “Fuser removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.
2 Turn the printer off and remove the rear cover. Check connector JFUSER1 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go step 3. If connector is damaged on system card, replace system card. Go to “System card removal”. If fuser cable is damaged, replace cable.
3 Check connector JLVPS1 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go step 4. If connector is damaged on system card, replace system card. Go to “System card removal”. If LVPS cable is damaged, replace LVPS. Go to “Low volt power supply (LVPS) removal”.
4 Replace fuser. Go to “Fuser removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.