Code: 920-14
Description: POST Error
Cartridge motor 2 (bottom) not connected
Cartridge motor 2 (bottom) not connected
Remedy: 1 Turn the printer off and remove the rear cover. Check connector JCART2 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If JCART2 cable is damaged, replace JCART2 cable. The cable parts packet contains one cartridge motor cable that works for either of the cartridge motors.
2 Remove right cover. Check for the following continuity between JCART2 and bottom cartridge connector. Is continuity present? JCART1 Bottom cartridge motor connector pin 1 pin 1 pin 2 pin 2 pin 3 pin 3 Go to step 3. Replace JCART2 cable. The cable parts packet contains one cartridge motor cable that works for either of the cartridge motors
3 Replace EP drive assembly. Go to “Electrophotographic Process (EP) drive assembly removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.
2 Remove right cover. Check for the following continuity between JCART2 and bottom cartridge connector. Is continuity present? JCART1 Bottom cartridge motor connector pin 1 pin 1 pin 2 pin 2 pin 3 pin 3 Go to step 3. Replace JCART2 cable. The cable parts packet contains one cartridge motor cable that works for either of the cartridge motors
3 Replace EP drive assembly. Go to “Electrophotographic Process (EP) drive assembly removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.