Code: 925-01
Description: Fan Error
Fan has stalled.
Fan has stalled.
Remedy: 1 Turn the printer off and remove the rear cover. Check connector JFAN1 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If JFAN1 cable is damaged, replace top access cover assembly. Go to “Top access cover assembly removal”.
2 Replace top access cover assembly. Go to “Top access cover assembly removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.
2 Replace top access cover assembly. Go to “Top access cover assembly removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.