Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 146-xx — Lexmark C522n

Code: 146-xx

Description: Motor Error
Duplex motor has failed.
Remedy: 1 Turn the printer off and remove the rear cover. Check connector JDUPLX1 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If JDUPLX1 cable is damaged, replace duplex front door assembly. Go to “Duplex front door assembly removal”.
2 Turn printer power on and check for 24 V dc between JCVR1 pin 1 (red wire) and ground. Is voltage present? Note: Ground lead of voltmeter can be placed on metal chasis to obtain ground. Go to step 3. Disconnect JCVR1 and check for 24 V dc between pin 1 of system card connector and ground. If voltage is present, replace 24V interlock switch.Go to “Top access door 24V interlock switch removal”. If voltage is not present, replace system card. Go to “System card removal”.
3 Reconnect JCVR1 if disconnected. Ensure top access door is completely closed. Check for 24 V dc between JCVR1 pin 2 (white wire) and ground. Is voltage present? Go to step 4. Replace 24V interlock switch.Go to “Top access door 24V interlock switch removal”.
4 Replace duplex front door assembly. Go to “Duplex front door assembly removal”. Problem solved. Replace system card. Go to “System card removal”.

← Xem tất cả mã lỗi Lexmark C522n

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie