Description: POST Error Bump align motor not connected
Remedy: 1 Turn the printer off and remove the rear cover. Check connector JBUMP1 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 2. If connector is damaged on system card, replace system card. Go to “System card removal”2 Replace bump aligner motor. Go to “Bump aligner motor removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.. If JBUMP1 cable is damaged, replace bump aligner motor. Go to “Bump aligner motor removal”.