Code: 920-15
Description: POST Error
Bad transfer belt NVRAM data
Bad transfer belt NVRAM data
Remedy: 1 Turn the printer off and remove the rear cover. Check connector JTRANS1 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If JTRANS1 cable is damaged, replace front door assembly. Go to “Front door assembly removal” for a non-duplex printer. Go to “Duplex front door assembly removal” for a duplex printer.
2 Replace transfer belt assembly. Go to “Transfer belt removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.
2 Replace transfer belt assembly. Go to “Transfer belt removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.