Code: 920-19
Description: POST Error
Stepper motor not connected.
Stepper motor not connected.
Remedy: 1 Turn the printer off and remove the rear cover. Check connector JTRANS2 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If JTRANS2 cable is damaged, replace EP drive assembly. Go to “Electrophotographic Process (EP) drive assembly removal”.
2 Replace EP drive assembly. Go to “Electrophotographic Process (EP) drive assembly removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.
2 Replace EP drive assembly. Go to “Electrophotographic Process (EP) drive assembly removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.