Code: 147-xx
Description: Motor Error
Tray 2 motor has failed.
Tray 2 motor has failed.
Remedy: 1 Turn the printer off and remove the rear cover. Check connector JOPT1 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If JOPT1 cable is damaged, replace option cable.
2 Remove 500-sheet assembly. Check autoconnects on both the assembly and the printer for damage. Are connectors free of damage? Go to step 3. If connector is damaged on 500-sheet assembly, replace 500-sheet assembly. If JOPT1 cable is damaged, replace option cable.
3 Check connectors J1 and J2 on the 500- sheet assembly for proper connection, cable for pinch points and cable or connector for any other damage. Are cables properly connected and damage free? Go to step 4. Replace 500-sheet assembly.
4 Reinstall 500-sheet assembly. Does error clear? Problem solved. Go to step 5.
5 Replace 500-sheet assembly. Does error clear? Problem solved. Replace system card. Go to “System card removal”.
2 Remove 500-sheet assembly. Check autoconnects on both the assembly and the printer for damage. Are connectors free of damage? Go to step 3. If connector is damaged on 500-sheet assembly, replace 500-sheet assembly. If JOPT1 cable is damaged, replace option cable.
3 Check connectors J1 and J2 on the 500- sheet assembly for proper connection, cable for pinch points and cable or connector for any other damage. Are cables properly connected and damage free? Go to step 4. Replace 500-sheet assembly.
4 Reinstall 500-sheet assembly. Does error clear? Problem solved. Go to step 5.
5 Replace 500-sheet assembly. Does error clear? Problem solved. Replace system card. Go to “System card removal”.