Code: 920-02
Description: POST Error
Tray 1 motor not connected
Tray 1 motor not connected
Remedy: 1 Turn the printer off and remove the rear cover. Check connector JTRAY2 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If JTRAY2 cable is damaged, replace paper pick mechanism. Go to “Paper pick mechanism assembly removal”.
2 Replace paper pick mechanism. Go to “Paper pick mechanism assembly removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.
2 Replace paper pick mechanism. Go to “Paper pick mechanism assembly removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.