Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 920-09...920-12 — Lexmark C534dtn

Code: 920-09...920-12

Description: POST Error
One toner sensor not connected
Remedy: 1 Turn the printer off and remove the rear cover. Check connector JHVPS1 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If HVPS1 cable is damaged, replace top access cover assembly. Go to “Top access cover assembly removal”.
2 Remove left cover. Go to “Left cover removal”. Check all toner level sensor cables connected to the rear of the HVPS for proper connection to HVPS, cable for pinch points and cable or connector for any other damage. Are connectors properly connected and cables and connectors damage free? Go to step 3. Properly connect toner level sensor cable if not properly connected. If sensor cable or connector is damaged, replace sensor. Go to “Toner level sensor removal”. If connector is damaged on HVPS, replace HVPS. Go to “High volt power supply (HVPS) removal”.
3 Disconnect JHVPS1 from system card and HVPS. Check for the following continuity. JHVPS1 cable HVPS end System card end pin 14 pin 14 Is continuity present? Go to step 4. Replace top access cover assembly. Go to “Top access cover assembly removal”.
4 Reconnect JHVPS1 cable to system card and HVPS. Do not reinstall left cover, but ensure that front access door and top cover assembly are closed and that the waste toner assembly is reinstalled. Turn printer on. Attach the negative end of the voltmeter to the ground and check the voltage on pin 1 of each toner level sensor cable. You will need to check this on the back of the HVPS (see illustration below). Is there approximately 5 Vdc on any of the pins? Replace toner level sensor that has 5 V dc on pin 1. Go to “Toner level sensor removal”. Go to step 5.
5 Replace HVPS. Go to “High volt power supply (HVPS) removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.

← Xem tất cả mã lỗi Lexmark C534dtn

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie