Code: 154.03
Description: Service Yellow Cartridge Motor
Timeout waiting forMP_NUM_INITIAL_SAP_HALLS.
Timeout waiting forMP_NUM_INITIAL_SAP_HALLS.
Remedy: 1 Turn the printer off, and remove the rear shield. See “Rear shield removal”. Check the cable at JCARTB1 for proper connection to the controller board, the cable for pinch points, and the cable or connector for any other damage. Is the cable damaged? Replace the JCARTB1 cable. Go to step 2.
2 Verify the following values at JCARTB1 on the controller board. Are the values approximately correct? Go to step 3. Replace the controller board. See “Controller board removal”.
3 Replace the main drive assembly. See “Main drive gear assembly removal”. Does the error clear? Problem resolved. Replace the controller board. See “Controller board removal”.
2 Verify the following values at JCARTB1 on the controller board. Are the values approximately correct? Go to step 3. Replace the controller board. See “Controller board removal”.
3 Replace the main drive assembly. See “Main drive gear assembly removal”. Does the error clear? Problem resolved. Replace the controller board. See “Controller board removal”.