Code: 955.xx
Description: Service Code CRC <loc>
The Code ROM or NAND flash failed the Cyclic Redundancy Check (CRC)check or the NAND experienced an uncorrectable multi-bit failure. <loc> indicates the source of the failure and has one of the following values:
• CRC Failure:
The source is a failing package indicated by Pn where n is the package number. This error could occur on a controller with ROM or NAND flash and could occur as a result of the CRC check done when the machine is powered on. The rangeof package numbers is from 0 to 15.
• Error Correction Code (ECC)Failure:
The source is a failing page indicated by Bn where “n” is the page number. This error occurs only if a multi-bit failure is detectedduring the ECC execution. Single bit failures will be corrected automatically and will not result in a service error. The range of page numbers is from 0 to 1023.
The Code ROM or NAND flash failed the Cyclic Redundancy Check (CRC)check or the NAND experienced an uncorrectable multi-bit failure. <loc> indicates the source of the failure and has one of the following values:
• CRC Failure:
The source is a failing package indicated by Pn where n is the package number. This error could occur on a controller with ROM or NAND flash and could occur as a result of the CRC check done when the machine is powered on. The rangeof package numbers is from 0 to 15.
• Error Correction Code (ECC)Failure:
The source is a failing page indicated by Bn where “n” is the page number. This error occurs only if a multi-bit failure is detectedduring the ECC execution. Single bit failures will be corrected automatically and will not result in a service error. The range of page numbers is from 0 to 1023.
Remedy: