Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 913.xx — Lexmark C546dtn

Code: 913.xx

Description: Service DC Pick Motor
The DC pick motor over speed.
Remedy: 1 Turn the printer off, and then remove the rear shield. See “Rear shield removal”. Check the cable at JSP1 on the controller board for proper connection. Is the cable properly connected? Go to step 3. Properly connect the cables, and POR the printer. Go to step 2.
2 Did the printer function correctly after reconnecting the cables? Problem resolved. Go to step 3.
3 Turn the printer on, and then verify the following approximate values at JSP1: Are the values approximately correct? Replace the autocompensator mechanism. See “Autocompensator mechanism (ACM) removal—standard tray”. Replace the controller board. See “Controller board removal”.

← Xem tất cả mã lỗi Lexmark C546dtn

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie