Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 910 — Lexmark C710

Code: 910

Description: DC Motor (1) Locking error - the motor did not stabilize.
Remedy: A The print cartridge fails to increment the OPC in the cartridge. 1 Print Cartridge(s) Check the print cartridge for correct installation and signs of wear or damage to the cartridge coupling/drive gear. If no problems are found, try a new print cartridge. 2 Coupling Shaft Coupling Coupling Shaft Coupling Spring OPC/Coupling Drive Block Check the operation of the coupling system. If correct, verify the coupling shaft coupling spring is not broken and the coupling is operating properly. If problems are found, repair or replace the OPC/coupling block assembly, or parts. If the coupling system is not operating properly, go to the “Coupling Unit Service Check”.
B Error Code 910 displays 1 OPC Drive Motor (M 1) Engine Board MK1 Cable Check the OPC drive motor for proper operation. If incorrect replace the following FRUs in the order shown. 1. OPC drive motor assembly 2. Engine board 3. Cable MK 1

← Xem tất cả mã lỗi Lexmark C710

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie