Code: 907
Description: Toner Empty Sensor Error (TPD, TTR)
This error indicates the toner empty sensor has a problem.
This error indicates the toner empty sensor has a problem.
Remedy: 1 Check Connector Ensure the toner empty sensor (LED) connector is connected correctly to DCN7 on IOD1 P.W.B. board.
2 • Toner Sensor, P.W.B. Board (LED side) • IOD1 P.W.B. Board Check the voltage for (LEDON-N/D) If the voltage jumps to +24V between DCN7-7 and DCN7-9 on the IOD1 P.W.B. board, replace the toner sensor P.W.B. board. If the voltage drops to less than +24V between DCN1-15 and DCN1-41 on the IOD1 P.W.B. board, replace the IOD1 P.W.B. board.
3 Main Engine (MCTL P.W.B.) Board If the error still exists, replace the main engine (MCTL P.W.B.) board.
2 • Toner Sensor, P.W.B. Board (LED side) • IOD1 P.W.B. Board Check the voltage for (LEDON-N/D) If the voltage jumps to +24V between DCN7-7 and DCN7-9 on the IOD1 P.W.B. board, replace the toner sensor P.W.B. board. If the voltage drops to less than +24V between DCN1-15 and DCN1-41 on the IOD1 P.W.B. board, replace the IOD1 P.W.B. board.
3 Main Engine (MCTL P.W.B.) Board If the error still exists, replace the main engine (MCTL P.W.B.) board.