Code: 995
Description: OPC Belt Cartridge Belt Marker Sensor (PBS) Error
This error indicates a problem with the OPC belt cartridge belt marker sensor (PBS).
This error indicates a problem with the OPC belt cartridge belt marker sensor (PBS).
Remedy: 1 Belt Cartridge (OPC) Ensure the printer is level. If the belt sensor (PBS) is stained, clean the belt marker sensor. Replace the OPC belt cartridge if it is damaged or leaning to one side.
2 Check Connector Ensure a proper connection between DCN16 on the IOD1 P.W.B. board and the belt marker sensor (PBS). Ensure a proper connection between DCN1 on the IOD1 P.W.B. board and 11CN on the main engine (MCTL P.W.B.) board.
3 Belt Marker Sensor (PBS) Check for +5V between DCN16-2 and DCN16-3 on the IOD1 P.W.B. board. If the voltage is +5V, replace the belt marker sensor. Check for +5V between DCN2-1 and DCN2-4 on the IOD1 P.W.B. board. If the voltage is +5V, replace the IOD1 P.W.B. board.
4 Main Engine (MCTL P.W.B.) Board If the problem still exists, replace the main engine (MCTL P.W.B.) board.
2 Check Connector Ensure a proper connection between DCN16 on the IOD1 P.W.B. board and the belt marker sensor (PBS). Ensure a proper connection between DCN1 on the IOD1 P.W.B. board and 11CN on the main engine (MCTL P.W.B.) board.
3 Belt Marker Sensor (PBS) Check for +5V between DCN16-2 and DCN16-3 on the IOD1 P.W.B. board. If the voltage is +5V, replace the belt marker sensor. Check for +5V between DCN2-1 and DCN2-4 on the IOD1 P.W.B. board. If the voltage is +5V, replace the IOD1 P.W.B. board.
4 Main Engine (MCTL P.W.B.) Board If the problem still exists, replace the main engine (MCTL P.W.B.) board.