Remedy: 1 Turn the printer off, and remove the rear frame cover. See “Rear frame cover removal”. Check the cable in connector JBLW1 (A) for proper connection to the system board, for pinch points, and any other damage to the cable or connector. Is the cable damaged? Replace the blower. See “Cartridge cooling fan removal”. Go to step 2. 2 Measure the resistance across fuse F5 (A) on the system board. Is the fuse blown? Replace the system board. See “System board removal”. Go to step 3. 3 Disconnect the cable in connector JBLW1, and connect a new cartridge cooling fan. Bring up the printer in Diagnostic menu Did the error clear? Replace the cartridge cooling fan. See “Cartridge cooling fan removal”. Replace the system board. See “System board removal”.