Code: 900.00...900.99
Description: Software Error (except 900.05)
Unrecoverable RIP software error.
Unrecoverable RIP software error.
Remedy: 1 POR the device. Does the error reoccur? Go to step 2. Problem resolved.
2 • Write down the exact 900.xx error code displayed on the device. • Turn the device off. • Clear the print queues. • Disconnect all communication cables, and remove all memory options. • Remove all ISP and modem cards. • Restart the device into diagnostic mode. Does the 900.xx error reoccur during startup? Go to step 3. Go to step 6.
3 Check all the cables connected to the RIP board for proper connectivity. Are the cables properly connected? Go to step 5. Go to step 4.
4 Properly connect the cables to the RIP board. Restart the device into diagnostic mode. Does the 900.xx error reoccur during startup? Go to step 5. Go to step 6.
5 Replace the RIP board, and restart the device. Does this fix the problem? Note: If an error, different from the original 900.xx, is displayed, consult the service check for that error. Problem resolved. Go to step 31.
2 • Write down the exact 900.xx error code displayed on the device. • Turn the device off. • Clear the print queues. • Disconnect all communication cables, and remove all memory options. • Remove all ISP and modem cards. • Restart the device into diagnostic mode. Does the 900.xx error reoccur during startup? Go to step 3. Go to step 6.
3 Check all the cables connected to the RIP board for proper connectivity. Are the cables properly connected? Go to step 5. Go to step 4.
4 Properly connect the cables to the RIP board. Restart the device into diagnostic mode. Does the 900.xx error reoccur during startup? Go to step 5. Go to step 6.
5 Replace the RIP board, and restart the device. Does this fix the problem? Note: If an error, different from the original 900.xx, is displayed, consult the service check for that error. Problem resolved. Go to step 31.