Code: 920.21
Description: POST Error
+24 V power supply failure.
+24 V power supply failure.
Remedy: 1 Check the input voltage switch on the back of the low-voltage power supply (LVPS). Some LVPS FRU do not have switches and switch automatically. If your does not have a switch, go to step 2. Is the voltage level (115/230) properly set? Go to step 2. Set switch for the proper country voltage.
2 Turn the printer off, and then remove the rear frame cover. See “Rear frame cover removal”. Reseat the cable in connector JLVPS2 (A). Does the error clear? Problem resolved. Go to step 3.
3 Check the cable JLVPS2 for pinch points and any other damage to the cable or connector. Is the cable damaged? Replace the low-voltage power supply. See “Lowvoltage power supply (LVPS) removal”. Go to step 4.
4 Measure the resistance across fuses F5, F6, F7, F9, F10, F12, and F13 on the system board. Are any of the fuses blown?
2 Turn the printer off, and then remove the rear frame cover. See “Rear frame cover removal”. Reseat the cable in connector JLVPS2 (A). Does the error clear? Problem resolved. Go to step 3.
3 Check the cable JLVPS2 for pinch points and any other damage to the cable or connector. Is the cable damaged? Replace the low-voltage power supply. See “Lowvoltage power supply (LVPS) removal”. Go to step 4.
4 Measure the resistance across fuses F5, F6, F7, F9, F10, F12, and F13 on the system board. Are any of the fuses blown?