Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 920.11 — Lexmark C734dnw

Code: 920.11

Description: POST Error
Two toner sensors are not connected.
Remedy: 1 Remove the left cover. See “Left cover removal”. Check all the toner level sensor cables connected to the rear of the HVPS. Are any of the cables damaged? If only one of the toner level sensor is damaged: • Disconnect the sensor. • Go to step 6.’ If two toner level sensors are damaged, replace the damaged sensors. See “Toner level sensor removal”. Go to step 2.
2 Reconnect the HVPS cable. Disconnect one of the toner level sensors and POR the printer. Does the 920.11 error occur again? • If the error recurrs, then this sensor is one of the bad sensors.’ • Continue disconnecting the toner level sensors until two sensors are disconnected and the 920.11 error occurs. • Replace the toner level sensors that are disconnected. See “Toner level sensor removal”. Repeat this step for the other toner level sensors until the 920.11.

← Xem tất cả mã lỗi Lexmark C734dnw

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie