Code: 920.18
Description: POST Error
Cartridge motor 3 (bottom) is not connected.
Cartridge motor 3 (bottom) is not connected.
Remedy: 1 Turn the printer off and remove the rear frame cover. See “Rear frame cover removal”. Reseat the cables in connectors JCARTP2 (A) and JCARTS2 (B). Does the error clear? Problem resolved. Go to step 2.
2 Check the cartridge motor 2/3 cables in connectors JCARTP2 and JCARTS2 for pinch points and any other damage to the cables or the connectors. Are the cables damaged? Replace the cartridge motor 2/3 cable. See “Cartridge motor 2/3 cable removal”. Go to step 3.
3 Remove the right cover. Check the cartridge motor 2/3 cable for proper connections to the EP drive assembly, pinch points for the cable, and damage to the cable or connector. Is either cable damaged? Replace the cartridge motor 2/3 cable. See “Cartridge motor 2/3 cable removal”. Go to step 4.
4 Measure the resistance across the fuse F10 on the system board. Is the fuse blown? Replace the system board. See “System board removal”. Replace the EP drive assembly. See “Electrophotographic (EP) drive assembly removal”
2 Check the cartridge motor 2/3 cables in connectors JCARTP2 and JCARTS2 for pinch points and any other damage to the cables or the connectors. Are the cables damaged? Replace the cartridge motor 2/3 cable. See “Cartridge motor 2/3 cable removal”. Go to step 3.
3 Remove the right cover. Check the cartridge motor 2/3 cable for proper connections to the EP drive assembly, pinch points for the cable, and damage to the cable or connector. Is either cable damaged? Replace the cartridge motor 2/3 cable. See “Cartridge motor 2/3 cable removal”. Go to step 4.
4 Measure the resistance across the fuse F10 on the system board. Is the fuse blown? Replace the system board. See “System board removal”. Replace the EP drive assembly. See “Electrophotographic (EP) drive assembly removal”