Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 920.10 — Lexmark C736

Code: 920.10

Description: POST Error
Three toner sensors are not connected.
Remedy: 1 Remove the left cover. See “Left cover removal”. Check all the toner level sensor cables connected to the rear of the HVPS. Are any of the cables damaged? If only one or two of the toner level sensor are damaged: • Disconnect the sensor(s). • Go to step 6. If three toner level sensors are damaged, replace the damaged sensors. See “Toner level sensor removal”. Go to step 2.
2 Reconnect the HVPS cable. Disconnect one of the toner level sensors and POR the printer. Does the 920.10 error occur again? • Then this sensor is one of the three bad sensors’ • Continue disconnecting the toner level sensors until three sensors are disconnected and the 920.10 error occurs. • Replace the toner level sensors that are disconnected. See “Toner level sensor removal”. Repeat this step for the other toner level sensors until the 920.10.

← Xem tất cả mã lỗi Lexmark C736

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie