Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 920.06 — Lexmark C736dn

Code: 920.06

Description: POST Error
Input sensor not connected.
Remedy: 1 Is the input sensor flag damaged? Replace the paper pick mechanism. See “Paper pick mechanism assembly removal”. Go to step 2.
2 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Check the cable in connector JTRAY1 for proper connection to the system board, for pinch points, and any other damage to the cable or connector. Is the cable damaged? Replace the paper pick mechanism. See “Paper pick mechanism assembly removal”. Go to step 3.
3 1. Disconnect the cable in connector JTRAY1. 2. Connect the cable from the new paper pick assembly in the connector TRAY2. 3. Bring the printer up in Diagnostics Menu (turn off the printer, press and hold and . and turn on the printer). 4. Select SENSOR TESTS, and press Select( ). 5. Select Dynamic Sensors, and press Select( ). 6. Select Input, and press Select( ). 7. Activate the input sensor. pin 2 and ground, and POR the printer. Did the input sensor change from Open to Closed? Replace the paper pick mechanism. See “Paper pick mechanism assembly removal”. Replace the system board. See “System board removal”.

← Xem tất cả mã lỗi Lexmark C736dn

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie