Code: 146.01...146.08
Description: Motor Error
Duplex motor has failed.
Duplex motor has failed.
Remedy: 1 Is the front door assembly damaged? Replace the front door assembly. See “Front door assembly removal”. Go to step 2.
2 Is the multipurpose feeder damaged? Replace input tray. Go to step 3.
3 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Check the cable in connector JDX1 (A) (MP feeder/duplex motor cable) for proper connection to the system board, the cable for pinch points, and the cable or connector for any other damage. Is the cable damag4 Remove the right cover. See “Right cover removal”. Check the MP feeder/duplex motor cable for proper connection to the MPF/duplex motor, pinch points for the cable, and damage to the cable or connector. Is either cable damaged? Replace the MPF/duplex motor cable. See “Multipurpose feeder (MPF)/duplex motor cable removal”. Go to step 5.ed? Replace the MPF/duplex motor cable. See “Multipurpose feeder (MPF)/duplex motor cable removal”. Go to step 4.
5 Check the MPF/duplex gear assembly for damage. Do the gears turn freely, and are they free of damage? Go to step 6. Replace the MPF/duplex gear assembly. See “Multipurpose feeder (MPF)/duplex gear and housing removal”.
6 Measure the resistance across fuse F5 (A) on the system board. Is the fuse blown? Replace the system board. See “System board removal”. Replace the MPF/duplex motor. See “Multipurpose feeder (MPF)/duplex motor assembly removal”.
2 Is the multipurpose feeder damaged? Replace input tray. Go to step 3.
3 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Check the cable in connector JDX1 (A) (MP feeder/duplex motor cable) for proper connection to the system board, the cable for pinch points, and the cable or connector for any other damage. Is the cable damag4 Remove the right cover. See “Right cover removal”. Check the MP feeder/duplex motor cable for proper connection to the MPF/duplex motor, pinch points for the cable, and damage to the cable or connector. Is either cable damaged? Replace the MPF/duplex motor cable. See “Multipurpose feeder (MPF)/duplex motor cable removal”. Go to step 5.ed? Replace the MPF/duplex motor cable. See “Multipurpose feeder (MPF)/duplex motor cable removal”. Go to step 4.
5 Check the MPF/duplex gear assembly for damage. Do the gears turn freely, and are they free of damage? Go to step 6. Replace the MPF/duplex gear assembly. See “Multipurpose feeder (MPF)/duplex gear and housing removal”.
6 Measure the resistance across fuse F5 (A) on the system board. Is the fuse blown? Replace the system board. See “System board removal”. Replace the MPF/duplex motor. See “Multipurpose feeder (MPF)/duplex motor assembly removal”.