Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 147.09...147.25 — Lexmark C746

Code: 147.09...147.25

Description: Motor Error
Aligner motor has failed.
Remedy: 1 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Check the cable in connector JFPCK1 for proper connection to the system board, the cable for pinch points, and the cable or connector for any other damage. Is the cable damaged? Replace the paper pick mechanism. See “Paper pick mechanism assembly removal”. Go to step 2.
2 Check the cable in the connector JFDPCK1 for pinch points and for any other damage to the cable or connector. Is the cable damaged? Replace paper pick mechanism. See “Paper pick mechanism assembly removal”. Go to step 3.
3 1. Disconnect the cable in connector JFDPCK1 and connect the cable from the new paper pick mechanism to JFDPCK1. 2. Bring the printer up in Diagnostics Menu (turn off the printer, press and hold and . and turn on the printer). 3. Select MOTOR TESTS, and press Select ( ). 4. Close the front cover. 5. Select Align Motor Test, and press Select ( ). Did you hear the align motor run? Replace the paper pick mechanism. See “Paper pick mechanism assembly removal”. Replace the system board. See “System board removal”.

← Xem tất cả mã lỗi Lexmark C746

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie