Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 920.03 — Lexmark C746

Code: 920.03

Description: POST Error
Transfer module not connected.
Remedy: 1 Open the front access door. Reseat the transport cable. Does the error clear? Problem resolved. Go to step 2.
2 Turn the printer off, and then remove the rear frame cover. See “Rear frame cover removal”. Reseat the transport cable in connector JTPS1 (A). Does the error clear? Problem resolved. Go to step 3.
3 Check the transport cable in connector JTPS1 for pinch points and for any other damage to the cable or connector. Is the cable damaged? Replace the transport cable. See “Transport cable removal”. Go to step 4.
4 Check the continuity at JTPS1, pins 1–10). Is there continuity? Go to step 5. Replace the cartridge motor1/fuser motor cable. See “Cartridge motor 1/ fuser cable removal”.
5 Replace the transport belt assembly. See “Transfer module removal”. Does the error clear? Problem resolved. Replace the system board. See “System board removal”.

← Xem tất cả mã lỗi Lexmark C746

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie