Description: While feeding from a lower tray, tray 4 pass thru sensor is not made. Possible causes: • Incorrect paper loading for the lower tray • Incorrect media restraint setting for the lower tray • Paper tray 4 assembly failure • Paper tray 5 assembly failure
Remedy: 1. Clear away anything in the paper path that might cause the paper to jam. 2.Make sure the proper media is set for the type of paper used in the lower tray. 3. Fan the media, and stack flat in the lower tray. 4. Properly set the media restraints in the lower tray. 5. Check the pick arm rolls in the lower feeding tray and replace if worn. If the problem persists, go to “244.26—Paper Jam service check”.