Code: 920.09
Description: POST Error
Four toner sensors are not connected.
Four toner sensors are not connected.
Remedy: 1 Turn the printer off, and then remove the rear frame cover. See “Rear frame cover removal”. Reseat the cable in connector JHVPS1 (A). Does the error clear? Problem resolved. Go to step 2.
2 Check the HVPS cable in connector JHVPS1 for pinch points and any other damage to the cable or connector. Is the cable damaged? Replace the HVPS cable. See “High-voltage power supply (HVPS) cable removal”. Go to step 3.
3 Remove the left cover. See “Left cover removal”. Check the HVPS cable for correct connection to the HVPS board, pinch points for the cable, or any other damage. Is the cable damaged? Replace the HVPS cable. See “High-voltage power supply (HVPS) cable removal”. Go to step 4.
4 Replace the HVPS board. See “High-voltage power supply (HVPS) removal”. Does the error clear? Problem resolved. Replace the system board. See “System board removal”.
2 Check the HVPS cable in connector JHVPS1 for pinch points and any other damage to the cable or connector. Is the cable damaged? Replace the HVPS cable. See “High-voltage power supply (HVPS) cable removal”. Go to step 3.
3 Remove the left cover. See “Left cover removal”. Check the HVPS cable for correct connection to the HVPS board, pinch points for the cable, or any other damage. Is the cable damaged? Replace the HVPS cable. See “High-voltage power supply (HVPS) cable removal”. Go to step 4.
4 Replace the HVPS board. See “High-voltage power supply (HVPS) removal”. Does the error clear? Problem resolved. Replace the system board. See “System board removal”.