Code: 140.01...140.10
Description: Autocomp Motor Error
Tray 1 motor has failed.
Tray 1 motor has failed.
Remedy: 1 Turn the printer off, and then remove the rear frame cover. See “Rear frame cover removal”. Check the cable in connector JFDPCK1 (A) for proper connection to the system board, the cable for pinch points, and the cable or connector for any other damage. Is the cable damaged? Replace the paper pick mechanism. See “Paper pick mechanism assembly removal”. Go to step 2.
2 Measure the resistance across fuse F13 on the system board. Is the fuse blown? Replace the system board. See “System board removal”. Go to step 3.
3 1. Disconnect the cable in the connector JFDPCK1. 2. Connect the cable for the new paper pick mechanism. 3. Select PRINT TESTS, and press Select ( ). 4. Select Tray 1 and press Select ( ). 5. Select Single, and press Select ( ). Does the new pick motor turn before the feed error occurred? Replace the paper pick mechanism. See “Paper pick mechanism assembly removal”. Replace the system board. See “System board removal”.
2 Measure the resistance across fuse F13 on the system board. Is the fuse blown? Replace the system board. See “System board removal”. Go to step 3.
3 1. Disconnect the cable in the connector JFDPCK1. 2. Connect the cable for the new paper pick mechanism. 3. Select PRINT TESTS, and press Select ( ). 4. Select Tray 1 and press Select ( ). 5. Select Single, and press Select ( ). Does the new pick motor turn before the feed error occurred? Replace the paper pick mechanism. See “Paper pick mechanism assembly removal”. Replace the system board. See “System board removal”.