Code: 156.01, 156.03
Description: Motor Error
COD (Color On Demand) motor failed.
COD (Color On Demand) motor failed.
Remedy: 1 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Check the cable in connector JBOR1 (A) on the system board for proper connection, for cable pinch points, and for any other damage to the cable or connector. Is the cable damaged? Replace the COD assembly. See “Color on demand assembly removal”. Go to step 2.
2 Measure the resistance across fuse F12(A) on the system board. Is the fuse blown? Replace the system board. See “System board removal”. Go to step 3.
3 1. Disconnect the cable in connector JBOR1 (A), and then connect the cable from the new COD group assembly. 2. Bring the printer up in Diagnostics Menu (turn off the printer, press and hold and . and turn on the printer). 3. Select MOTOR TESTS, and press Select( ). 4. Select COD, and press Select( ). 5. Select Forward. If nothing happens, Select Reverse. Did the COD motor pass the test? Replace the COD assembly. See “Color on demand assembly removal”. Replace the system board. See “System board removal”.
2 Measure the resistance across fuse F12(A) on the system board. Is the fuse blown? Replace the system board. See “System board removal”. Go to step 3.
3 1. Disconnect the cable in connector JBOR1 (A), and then connect the cable from the new COD group assembly. 2. Bring the printer up in Diagnostics Menu (turn off the printer, press and hold and . and turn on the printer). 3. Select MOTOR TESTS, and press Select( ). 4. Select COD, and press Select( ). 5. Select Forward. If nothing happens, Select Reverse. Did the COD motor pass the test? Replace the COD assembly. See “Color on demand assembly removal”. Replace the system board. See “System board removal”.