Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 920.07 — Lexmark C746n

Code: 920.07

Description: POST Error
Narrow media sensor not connected.
Remedy: 1 Turn the printer off, and then remove the rear frame cover. See “Rear frame cover removal”. Reseat the cable in connector JTRAY1. Does the error clear? Problem resolved. Go to step 2.
2 Check the cable in connector JTRAY1 for pinch points and the cable or connector for any other damage. Is the cable damaged? Replace the paper pick mechanism. See “Paper pick mechanism assembly removal”. Go to step 3.
3 POR the printer. Place a voltmeter between JTRAY1, pin 4, and ground (pin 1). Does the meter read 5 V dc? Go to step 4. Replace the system board. See “System board removal”.
4 1. Disconnect the cable in JTRAY1. 2. Connect the cable from the new paper pick mechanism. 3. Bring the printer up in Diagnostic menu (turn off the printer, press and hold and . and turn on the printer). 4. Select SENSOR TESTS, and press Select( ). 5. Select Dynamic Sensors, and press Select( ). 6. Select Narrow Media, and press Select( ). 7. Activate the narrow media sensor. Did the narrow media sensor change from Closed to Open? Remove the paper pick mechanism. See “Paper pick mechanism assembly removal”. Replace the system board. See “System board removal”.

← Xem tất cả mã lỗi Lexmark C746n

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie