Code: 145.09...145.27
Description: Motor Error
EP drive assembly cartridge 3 (bottom) motor has failed.
EP drive assembly cartridge 3 (bottom) motor has failed.
Remedy: 1 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Check the cables in connector JCARTP2 (A) and JCARTS2 (B) (cartridge motor 2/3 cable) for proper connection to the system board, for cable pinch points, and for any other damage to the cable or connector. Is the cable damaged? Replace cartridge motor 2/ 3 cable. See “Cartridge motor 2/3 cable removal”. Go to step 2.
2 Remove the right cover. Check the cartridge motor 2/3 cable for proper connection to the EP drive assembly, pinch points for the cable, and damage to the cable or connector (A). Is either cable damaged? Replace the cartridge motor 2/3 cable. See “Cartridge motor 2/3 cable removal”. Go to step 3.
3 Measure the resistance across fuse F10 on the system board. Is the fuse blown? Replace the system board. See “System board removal”. Replace the EP drive assembly. See “Electrophotographic (EP) drive assembly removal”.
2 Remove the right cover. Check the cartridge motor 2/3 cable for proper connection to the EP drive assembly, pinch points for the cable, and damage to the cable or connector (A). Is either cable damaged? Replace the cartridge motor 2/3 cable. See “Cartridge motor 2/3 cable removal”. Go to step 3.
3 Measure the resistance across fuse F10 on the system board. Is the fuse blown? Replace the system board. See “System board removal”. Replace the EP drive assembly. See “Electrophotographic (EP) drive assembly removal”.