Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 920.22 — Lexmark C748

Code: 920.22

Description: POST Error
Fuser bubble sensor is not connected.
Remedy: 1 Is the bubble sensor flag damaged? Replace the fuser. See “Fuser removal”. Go to step 2.
2 Remove the rear frame cover. See “Rear frame cover removal”. Check the fuser DC cable in connector JFUSER1 (A) for proper connection to the system board, pinch points, and any other damage to the cable or connector. Is the cable damaged? Replace the fuser DC cable. See “Fuser DC cable removal”. Go to step 3.
3 Place a voltmeter between the fuser DC autoconnect, pin 3 and ground (pin 6). Does the voltage meter read +5 V dc? Go to step 5. Go to step 4.
5 1. Replace the fuser. 2. Bring the printer up in Diagnostics Menu (turn off the printer, press and hold and . and turn on the printer). 3. Select SENSOR TESTS, and press Select( ). 4. Select Dynamic Sensors, and press Select( ). 5. Select Bubble, and press Select( ). 6. Open the front door. 7. Activate the bubble sensor. Did the bubble sensor change from Open to Closed? Problem resolved. Replace the system board. See “System board removal”.

← Xem tất cả mã lỗi Lexmark C748

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie